Comfast Wireless Repeater Setup Not Happening? Let’s Fix It!
If you are facing WiFi dead zones in your home, then you can consider getting yourself a WiFi range extender. WiFi extenders or repeaters are used to extend the existing network in the home. It takes in signals from the main gateway and then repeats it further in the areas where there is no WiFi signal. If you have purchased a Comfast WiFi range repeater, then the very first step is to do Comfast wireless repeater setup. In case you are not able to execute the setup process, then this informative guide has got you covered. You will get the best possible solutions to resolve Comfast repeater setup issues. Thus read on.
Comfast Wireless Repeater Setup Issue [Causes]
Getting setup issues is common. But it is important that you know the reason behind why you are failing in completing the Comfast WiFi repeater setup. Some common reasons have been highlighted below.
- Using incorrect process
- Fluctuations in the power supply
- Unstable internet connection
- Using a PC with an outdated operating system
- An older version of the web browser is being used
- The browser is filled with junk data
- Faulty cables used
- You are using the wrong login details
These are some most common causes that prevent you from getting the setup done. Let us now tell you how you can eliminate the issue at hand.
How to Fix Comfast Repeater Setup Issues?
Before getting involved in deep troubleshooting, we first want you to verify and fix a few things:
Verify Power Supply
First of all, you need to check the power supply to the Comfast repeater. If the power supply is not adequate, you will never be able to execute the Comfast wireless repeater setup process.
Check the power outlet into which the power adapter of the repeater is plugged. If there’s any damage to it, then choose another socket to apply power to the device.
Also, check the power adapter. It should be damage-free and not loosely connected. Replace the cable if required. Also, make sure it is not loose.
In the event of power outages in your area, using a UPS is suggested.
Check Internet Connection
You next need to verify the internet connection. An unstable internet connection is another reason why you can not complete the Comfast wireless repeater setup.
Check with your ISP if there’s some maintenance going on or if there is an issue with the internet. Let him get things resolved from his end and then try to set up your Comfast repeater.
If by these two steps, the setup issue has not been fixed, then use the hacks that have been given in the next section.
How to Fix Comfast Extender Setup Issues?
Reboot the Repeater
Rebooting helps to resolve various temporary glitches with the extender. Therefore, reboot your repeater now. Power it off and remove it from the power source. After some time, plug it back in and apply power to it.
Check Ethernet Connection
Check the Ethernet cable that you are using to make the connection between the extender and the router. It has to be in good condition. Any damage on it means it needs to be replaced. Plus ensure that the cable is not connected loosely. The Ethernet connection between the two devices should be firm and secure.
Fix the Browser
If you have not updated your web browser lately, then it is now time that you update it. At times, older version of the browser wouldn’t let you access some web pages. So go to the settings of the browser and update it right away.
Apart from that, clean the cache, cookies, and browsing history from the browser which is yet another reason why you may not be able to execute the setup task.
Use Correct Login Details
Be sure that you use the correct login web address and the login credentials to access the Comfast WiFi extender login page and do the setup. Make no typing errors and ensure typing them in the correct fields.
Wrapping Things Up
This is all about how you can fix Comfast wireless repeater setup issues. We are very certain that by keeping the above-mentioned tips into consideration, you will be able to complete the setup process easily.
